The interlayer shear effect on graphene multilayer resonators

Graphene nanostrips with single or few layers can be used as bending resonators with extremely high sensitivity to environmental changes. In this paper we report molecular dynamics (MD) simulation results on the fundamental and secondary resonant frequencies f of cantilever graphene nanostrips with different layer number n and different nanostrip length L. The results deviate significantly from the prediction of not only the Euler-Bernoulli beam theory (f∝nL⁻²), but also the Timoshenko's model. Since graphene nanostrips have extremely high intralayer Young's modulus and ultralow interlayer shear modulus, we propose a multibeam shear model (MBSM) that neglects the intralayer stretch but accounts for the interlayer shear. The MBSM prediction of the fundamental and secondary resonant frequencies f can be well expressed in the form f−f_mono∝[(n-1)/n]^bL^−2(1−b), where f_mono denotes the corresponding resonant frequency as the layer number is 1, with b=0.61 and 0.77 for the fundamental and secondary resonant modes. Without any additional parameters fitting, the prediction from MBSM agrees excellently with the MD simulation results. The model is thus of importance for designing multilayer graphene nanostrips based applications, such as resonators, sensors and actuators, where interlayer shear has apparent impacts on the mechanical deformation, vibration and energy dissipation processes therein.     

侧伏规律在岩质边坡结构面编录中的应用

理论上,据边坡设计坡面来编录展示结构面的迹线分布应与其在坡面内的侧伏交线一致。把握一定的侧伏规律,处以适当的素描技法,既可吻合实际情况,又可提高绘图效率和资料质量,对边坡结构模型的准确分析不无裨益。有鉴于此,经过现场观测总结,分析了结构面与坡面的各种交切关系及其迹线的侧伏特征。在侧伏规律公式推导的基础上,根据两者产状提出其特征三角形判别法,并编制相应的算图,可校核以及在适当条件下推测某一产状要素。讨论了实践中几类难以作图的特殊情况下侧伏规律的应用。     

On stress-state dependent plasticity modeling: Significance of the hydrostatic stress, the third invariant of stress deviator and the non-associated flow rule

It has been shown that the plastic response of many materials, including some metallic alloys, depends on the stress state. In this paper, we describe a plasticity model for isotropic materials, which is a function of the hydrostatic stress as well as the second and third invariants of the stress deviator, and present its finite element implementation, including integration of the constitutive equations using the backward Euler method and formulation of the consistent tangent moduli. Special attention is paid for the adoption of the non-associated flow rule. As an application, this model is calibrated and verified for a 5083 aluminum alloy. Furthermore, the Gurson-Tvergaard-Needleman porous plasticity model, which is widely used to simulate the void growth process of ductile fracture, is extended to include the effects of hydrostatic stress and the third invariant of stress deviator on the matrix material.     

Dual-stage nested homogenization for rate-dependent anisotropic elasto-plasticity model of dendritic cast aluminum alloys

This paper proposes a nested dual-stage homogenization method for developing microstructure based continuum elasto-viscoplastic models for large secondary dendrite arm spacing or SDAS cast aluminum alloys. Microstructures of these alloys are characterized by extremely inhomogeneous distribution of inclusions along the dendrite cell boundaries. Traditional single-step homogenization methods are not suitable for this type of microstructure due to the size of the representative volume element (RVE) and the associated computations required for micromechanical analyses. To circumvent this limitation, two distinct RVE’s or statistically equivalent RVE’s are identified, corresponding to the inherent scales of inhomogeneity in the microstructure. The homogenization is performed in multiple stages for each of the RVE’s identified. The macroscopic behavior is described by a rate-dependent, anisotropic homogenization based continuum plasticity (HCP) model. Anisotropy and viscoplastic parameters in the HCP model are calibrated from homogenization of micro-variables for the different RVE’s. These parameters are dependent on microstructural features such as morphology and distribution of different phases. The uniqueness of the nested two-stage homogenization is that it enables evaluation of the overall homogenized model parameters of the cast alloy from limited experimental data, but also material parameters of constituents like inter-dendritic phase and pure aluminum matrix. The capabilities of the HCP model are demonstrated for a cast aluminum alloy AS7GU having a SDAS of 30 μm.     

A self-optimizing inverse analysis method for estimation of cyclic elasto-plasticity model parameters

In this paper, a novel inverse analysis methodology call a Self-Optimizing Inverse Method (Self-OPTIM) has been presented, which inversely estimates cyclic elasto-plastic constitutive model parameters using global forces and displacement on the same partial boundaries and full-(or partial-) field displacement data. A novelty of the methodology is that it automatically self-estimates material parameters by updating “full-field” reference stresses and strains through two parallel nonlinear finite element simulations. Although a well-known classical cyclic plasticity model is chosen in this paper, it must be emphasized that the proposed Self-OPTIM method is a model-independent method, which means that any advanced model can be naturally integrated with the proposed methodology. Thus, using numerically generated test data of low-carbon steel specimens (AISI 1010), the proposed Self-OPTIM method has been verified showing its successful performance to estimate nonlinear isotropic and kinematic hardening parameters, yield stress, Young’s modulus and Poisson ratio. The effects of experimental noises from CCD camera and measurement errors of the boundary forces are also investigated for the Self-OPTIM method.     

Experimental study on condensation heat transfer of steam on vertical titanium plates with different surface energies

Visual experiments were employed to investigate heat transfer characteristics of steam on vertical titanium plates with/without surface modifications for different surface energies. Stable dropwise condensation and filmwise condensation were achieved on two surface modification titanium plates, respectively. Dropwise and rivulet filmwise co-existing condensation form of steam was observed on unmodified titanium surfaces. With increase in the surface subcooling, the ratio of area (η) covered by drops decreased and departure diameter of droplets increased, resulting in a decrease in condensation heat transfer coefficient. Condensation heat transfer coefficient decreased sharply with the values of η decreasing when the fraction of the surface area covered by drops was greater than that covered by rivulets. Otherwise, the value of η had little effect on the heat transfer performance. Based on the experimental phenomena observed, the heat flux through the surface was proposed to express as the sum of the heat flux through the dropwise region and rivulet filmwise region. The heat flux through the whole surface was the weighted mean value of the two regions mentioned above. The model presented explains the gradual change of heat transfer coefficient for transition condensation with the ratio of area covered by drops. The simulation results agreed well with the present experimental data when the subcooling temperature is lower than 10 °C.     

框架剪力墙结构的定向爆破倒塌过程

利用ANSYS/LS-DYNA有限元软件,分别采用整体式模型和共用节点分离式模型对某高层框架剪力墙结构的定向爆破拆除进行数值模拟.通过与实际工程的对比发现,分离式模型模拟的效果更贴近实际,模拟结果更准确;此外,待拆除结构的爆破切口适当上移,可以减少结构的倒塌范围;最后,分析了钢筋和混凝土单元的应力时程曲线,指出共用结点...     

爆炸焊接界面波的数值模拟

借助动力学分析软件ANSYS/LS-DYNA 11.0,运用光滑粒子流体动力学方法(SPH方法),建立以Johnson-Cook材料模型和Grüneisen状态方程为基础的热塑性流体力学模型,对同种钢板爆炸焊接界面波进行了数值模拟.结果表明,运用SPH方法可以得到清晰的爆炸焊接界面波形貌.与实验结果的比较表明:模拟误...